Subscribe to the college updates today.

We will send you regular college updates several times a week. Isn't that cool?


Actually we will not spam you and keep your personal data secure

SIT30816-Certificate III Commercial Cookery

SIT30816 – Certificate III in Commercial Cookery (CRICOS Course Code: 092047A)

Course Description

This qualification trains a person to work as a cook in Australia. Theory, practical classes and work-based training are essential components of this course which help students with the necessary on-the-job experience in a commercial kitchen. Students gain practical skills and experiences in real workplace settings and are job -ready at graduation.

No occupational licensing, certification or specific legislative requirements apply to this qualification.

Information on safety in a commercial kitchen and work-based training place:

Training in the commercial kitchen involves dealing with fire, knives, kitchen utensils, and slippery floor. To be compliant with WHS requirements and to ensure safety, students must:

  • read and follow WHS instructions
  • wear proper slip resistant safety boots
  • wear a uniform and apron
  • be aware of hazards to prevent slips, trips, and falls
  • be aware of fire-safety information to prevent kitchen fires
  • be aware of safety information to prevent cuts, burns, and lacerations
  • be aware of safety information to prevent food preparation area accidents
  • be aware of safety information to prevent lifting accident

Cultural considerations:

As part of the practical classes and work-based training, students will experience cooking:

  • meat (including beef, pork, poultry, lamb, seafood, etc.)
  • halal and non-halal food
  • dairy products
  • vegetables

The Students are advised to understand and take into consideration these requirements of training and assessment before making an informed decision during enrolment as requests for cancellation will not be granted on these grounds.

Course Fee

Application Fee Material Fee Tuition Fee
$250 $950 For overseas students: $11,250
For domestic students: $7000
Material fee varies from course to course. 

Course Prerequisites

  • We accept under 18 students.
  • Completion of high school studies equivalent to Australian Year 12 (international students only). For domestic students, year 11 or equivalent schooling OR
  • Completion of secondary school/ A level education overseas OR
  • Demonstrated knowledge, skills and experience in commercial cookery as per AQF requirements

English Language Requirement (for international students only)

Where the Department of Home Affairs (DHA) require evidence of English language proficiency for the student visa application process, will be required to provide proof of English language proficiency.

  • IELTS Test Score of 5.5 OR
  • TOEFL (iBT) Test Score of 46 OR
  • PTE Academic Test Score of 42 OR
  • Cambridge English: Advanced (CAE) Test Score of 47 OR
  • OET Pass Grade OR
  • TOEFL (PBT) Test Score of 527 (only if IELTS is not available) OR
  • You are an international student currently studying in Australia and have studied for a period of 6 months or more at Certificate III level or above.

LLN Support:

All clients will be interviewed to ensure entry requirements are satisfied prior to acceptance into the above course. As part of the enrolment process, all clients are required to sit for an LLN test (Language, Literacy and Numeracy Test) to ensure that the client has sufficient LLN capabilities to complete the course.

Clients with LLN difficulties will be provided additional learning supports by an appropriate staff member in ATCWA. The LLN support will be based on the client’s individual special needs and availability.

ATCWA will provide the required assistance to all students as per its registration requirements.

This support will include:

  • Identifying particular requirements (such as literacy, numeracy, English language or physical capabilities) learners would need to complete each course, and developing strategies to make support available where gaps are identified. This may include providing: Language, Literacy & Numeracy (LLN)support and additional tutorials
  • Other mechanisms, such as assistance in using computing technology for completion of assessments.


The duration of the course is 52 weeks including 12 weeks holidays.Students have and must complete a minimum of twenty (20) face to face timetabled hours per week. This course comprises of.

Duration of Course 52 weeks
Face to Face Class Training 40 weeks
Work Based Training / Industry Placement 192Hours [Approx.]
School Holidays 12 weeks
Training hours per week 20 hours
Self-paced study hours per week 10hours

Study Mode

The delivery method for this course:

  • Face-to-face in classroom and Training kitchen.
  • Work based training.

Training and Assessment includes:

  • Theory, lectures, assignments and various modes of assessment
  • Practical training and assessment at the ATCWA commercial training kitchen
  • Work-based training/Industry Placement
  • Self-paced (outside class hours) learning includes reading learner guides, research of subject learning material, completing learner guide activities, online quizzes, recipe research, and assessment tasks/activities using the resources on our Learning Management System
  • Students have 20 contact hours per week for a total of 800 contact hours. This course comprises of:
    • 800 hours of supervised study
    • 429 hours of unsupervised self-study activities
    • 192 hours [Approx.] of workplace training (log book)

Online learning

Students must attend class regularly as the course is delivered face-to-face in the classroom, training kitchen and in the workplace. Australian Technical College (Australian Technical College) strictly monitors attendance and course progress. As part of the training, learning materials are provided through an online medium of DIDASKO.



  • 8 Francis Street, PERTH WA 6000
  • Unit 2, 2324 Albany Hwy, Gosnells, WA 6110

Work based training/Industry Placement

ATCWA currently has in place agreements with the following employers for work based training:

  • Fraser’s Restaurant & Kings Park Function Centre, Fraser Ave,Kings Park West Perth WA 6005 
  • Chapters Bistro, 01/1244 Marmion Ave, Currambine WA 6054

Alternative industry placements may be arranged at the discretion of ATCWA as required.

Commercial Cookery Practical Classes delivered at:

The Australian Technical College Training Kitchen is located at Unit 2, 2324 Albany Hwy, GOSNELLS WA 6110.

Australian Technical College commercial kitchens are huge and spacious. Training at the commercial kitchen helps to develop and improve the cooking skills, management and customer service skills in a real work environment.The kitchens are located at the Gosnells kitchen site, a 9 minute/700 metre walk from the Gosnells Train Station, which is serviced on the Armadale line, caught from the Perth train depot on Wellington St, Perth.  Trains from Perth to Gosnells run every 15 minutes and take 20-25 minutes. The kitchens can also be accessed via a 50-minute bus ride on the 232 bus, which is taken from the Perth Bus port located on Wellington St Perth. Concession faresare $2.40 one way. Journey planners and ticket prices are obtained from

The students must attend theory classes at Australian Technical College’s main city campus and practical classes at the kitchen mentioned above. Students will attend practical classes from Term 1. Students who successfully complete the practical units are eligible to participate in work-based training / industry placement. Students will participate in work-based training / industry placement in the last six weeks of Term 4. (5 weeks at work place + 1 week at Australian Technical College main campus)

Students are also required to complete a period of work placement.

Materials Fee

Each course at ATCWA has included specific Materials fees that cover the costs of the following items that will be used by you in this particular course:

  • Text Books (Online)
  • Perishable items consumed during training in training kitchen

Uniform and kitchen tools

Students must buy uniform and kitchen tools by the 4th week of Term 1. These items are required before they start practical classes in the kitchen. Students can purchase this equipment from the following stockists. The cost of uniform and kitchen tools are not included in admission fee, material fee, and tuition fee.  The usual cost of uniform is $75, and Kitchen tool kit is $300 approx.


Students can purchase the uniform kit from the ATCWA Administration Office.

ATCWA’s preferred supplier for the Knife Kit is listed below however students are free to choose a provider of their choice.  All components of the knife kit as detailed below MUST be included, however.

West Coast Uniforms

2/30 Erindale Road

Balcatta, WA.

Ph: (08) 9240 6223

Ask for Steve.

2019 Kitchen Toolkit requirements:

  • 1 x toolbox
  • 1 x 20cm chef’s knife
  • 1 x 30cm serrated knife
  • 1 x 15cm boning knife
  • 1 x 10cm paring knife
  • 1 x turning knife
  • 1 x sharpening steel
  • 1 x long piano whisk
  • 1 x digital thermometer
  • 1 x melon baller (double ended)
  • 1 x 15 cm crank handled spatula
  • 1 x 20cm spatula
  • 1 x horseshoe peeler
  • 1 x pastry brush
  • 1 x piping bag
  • 1 x set plain piping nozzles
  • 1 x set star piping nozzles
  • 1 x gas lighter
  • 1 x plastic food scraper
  • 2 x towel (washable)


  • 1 x long sleeve plain chef’s jacket
  • 1 x pair hound’s tooth or fine checked chef’s pants
  • 1 x ½ length white apron
  • 1 x white pill cap
  • 1 x white neck tie
  • 1 x pair black safety steel cap shoes or boots with non-slip soles

Work Based Training / Industry Placement

WBT/IP Hours – 192 *

The hospitality industry varies in shift times however students are required to complete a minimum of 48 service periods.  A shift in the hospitality industry is usually 8 hours per shift and might cover the breakfast and lunch services or the lunch and dinner services as an example.  We estimate that students would be able to complete the 48 service periods in approximately 192 hours however, each venue might vary.

The industry placement facilitated by Australian Technical College. An Australian Technical College trainer/assessor will visit the workplace to approve the venue and the nature of the work to ensure it is compliant with the training package and WHS requirements. The Australian Technical College trainer/assessor is responsible for the work-based training experience and assessment. Support is provided to the student which includes providing clear information and a logbook for recording the details of the external training and assessment activities. Any queries or concerns regarding the work-based must be discussed with the trainer. You may also discuss your concerns with the Director of Studies (DOS) on +61 8 6377 8270 or

Work-based training / industry placement is conducted off-campus with our partners listed below. Please note that the list of our partners for work-based training / industry placement may vary from time to time based on availability and expiry of the contract.

Fraser’s Restaurant & Kings Park Function CentreChapters Bistro
Phone: +61 8 9481 7100Phone: (08) 9304 0935
Fraser Ave, Kings Park West Perth WA 600501/1244 Marmion Ave, Currambine WA 6054

Transfer student requirements

A student transferring fromanother education provider must have completed the first six months of their principal course of study before transferring to Australian Technical College. The student must provide the relevant documents as per Australian Technical College’s Transfer Students — Documents Checklist along with Application Form. They must also read and sign the Information Provided to Students before Enrolment — Checklist.

If the transferring overseas student already has a student visa and want to change their main course of study to a lower Australian Qualification Framework (AQF) level course, they will need to apply for and be granted a new student visa.

Please refer to Department of Home Affairs web site regarding changing courses:

Please refer to ESOS student fact sheet to know the responsibilities of an international student:

Please refer to our web site for more information on transfer students requirements:

Credit Transfer and Recognition of Prior Learning (RPL)

Nationally Recognised Training qualifications and statements of attainment issued by other Registered Training Organisations (RTOs) are recognised at Australian Technical College. A student may apply for Credit Transfer or RPL before enrolment. To get credit, students must submit all documentary evidence along with their application.

Units of competency

Unit Code Unit Nam Core /Elective
BSBSUS201 Participate in environmentally sustainable work practices Core
SITXWHS002 Identify hazards, assess and control safety risks Elective
BSBWOR203 Work effectively with others Core
SITHIND002 Source and use information on the hospitality industry Elective
SITXWHS001 Participate in safe work practices Core
SITXHRM001 Coach others in job skills Core
SITXFSA001 Use hygienic practices for food safety Core
SITXFSA002 Participate in safe food handling practices Core
SITHCCC017 Handle and serve cheese * Elective
SITXINV002 Maintain the quality of perishable items * Core
SITHKOP001 Clean kitchen premises and equipment * Core
SITHCCC001 Use food preparation equipment* Core
SITHCCC005 Prepare dishes using basic methods of cookery* Core
SITHCCC006 Prepare appetisers and salads * Core
SITHCCC008 Prepare vegetable, fruit, egg and farinaceous dishes* Core
SITHCCC007 Prepare stocks, sauces, and soups * Core
SITHCCC003 Prepare and present sandwiches * Elective
SITHCCC013 Prepare seafood dishes * Core
SITHCCC012 Prepare poultry dishes * Core
SITHCCC014 Prepare meat dishes * Core
SITHCCC019 Produce cakes, pastries, and breads * Core
SITHPAT006 Produce desserts * Core
SITHCCC018 Prepare food to meet special dietary requirements * Core
SITHKOP002 Plan and cost basic menus Core
SITHCCCO20 Work effectively as a cook * Corel

*Student must successfully complete /competent in SITXFSA001 – Use hygienic practices for food safety before the commencement of units listed above with asterisk.

Simulated Environment

Australian Technical College’s learning program includes Simulation which involves the student completing or dealing with a task, activity or problem that they might encounter in the workplace in their chosen field of study but it isbeing replicated in an environment that mimics the workplace context. Both the practice and assessment tasks create an environment that requires the student to use both generic skills (decision making/problem solving) and technical skills relevant to each unit.


As part of the course assessment requirements students are required to serve breakfast, lunch, and dinner to paying customers during weekdays and weekends. Sometimes students will be assessed at events and dinners that are likely to be in the evening or weekend to fulfill the course requirements.

In general, the following assessment items apply for this course.

  • Projects
  • Case Studies
  • Quiz
  • Practical Demonstrations
  • Portfolios
  • Knowledge-Based Tests
  • Checkpoints

Award Requirements

To be eligible for SIT30816 – Certificate III in Commercial Cookery, students should successfully complete all units. Where learners complete individual units of competency but not the entire qualification, they will receive a Statement of Attainment for any unit that is successfully completed.

Study Pathway and Career Opportunities

On completion of SIT30816 – Certificate III in Commercial Cookery, students may pursue SIT40516 – Certificate IV in Commercial Cookery. Job roles and titles vary across different industry sectors. Possible job titles relevant to this qualification include:

  • Cook

Intake dates

  • 15 April 2019
  • 15 July 2019
  • 14 October 2019